Sill finishers
Posted: Sat May 16, 2009 5:31 pm
HI all bought a set of 2dr S/S sill finishers for my van, obviously these are longer and need to be cut up, whic part do I need to cut? as these go from wider to narrower Thanks
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Sill finishers
Page 1 of 1
Posted: Sat May 16, 2009 5:39 pm
its wide at the front and narrow at the back so i would say cut the back off
Posted: Sat May 16, 2009 8:24 pm
Should have bought 4 door - fronts only!
Posted: Sat May 16, 2009 8:30 pm
they don't come in that size :S only kick plates but sill finishers are either 2dr saloon and traveller or 4dr saloons unless I missed them
Posted: Sat May 16, 2009 8:31 pm
the front door 4 door cill finishers are the same as the van or pick up
Posted: Sat May 16, 2009 8:34 pm
aren't 4dr sill finishers complete front to back?
Posted: Sat May 16, 2009 8:34 pm
Ahh right - I see 'sill finishers' - not the kick plates then !
Posted: Sat May 16, 2009 8:52 pm
Yes frank they are, had my lcv hat on for a moment there
Posted: Sat May 16, 2009 8:53 pm
:
I think the thread title was the give awayAhh right - I see 'sill finishers' - not the kick plates then !
Posted: Sat May 16, 2009 9:01 pm
Yes indeed - but I am easily confused these days ! Specially after a glass or two!
Posted: Sun May 17, 2009 9:00 am
I had mine cut from both sides few millimiters at a time. I think it does not make any difference actually, the most important thing is to respect the gaps to the mudguard and the door edge and b post.
Frank I have yr wheelspin DVD... still!!
Frank I have yr wheelspin DVD... still!!