Page 1 of 1
HELP
Posted: Fri May 08, 2009 5:54 pm
by mmjosh
which wires go to the ignition.
Posted: Fri May 08, 2009 6:02 pm
by d_harris
Posted: Fri May 08, 2009 6:06 pm
by mmjosh
that might help i bought a column and the ignition is on the column which is for the late models and i have a foot of loose wires with no conectors
Posted: Fri May 08, 2009 8:26 pm
by mike.perry
The colours are standard so the wires that go to the central ignition switch would go to the column switch. Start with the wires you can identify and from then on it is a process of elimination.
Posted: Fri May 08, 2009 9:17 pm
by d_harris
Aaah, I had no end of problems with that theres no info as the pins aren't numbered. If I remember I will take a pic of the back of mine tomorrow....
Posted: Fri May 08, 2009 9:38 pm
by bmcecosse
Print the wiring diagram out - and keep a copy in the car! Laminated if possible - for use on dark and stormy night when the lights go out!
Posted: Sat May 09, 2009 8:31 am
by Alec
Hello all,
I have copied this information, and find it very helpful, especially if no diagram is readily available:-
http://www.zen11896.zen.co.uk/vixen/par ... lours.html
Alec
Posted: Sat May 09, 2009 10:25 am
by bmcecosse
That's handy Alec! Well done.
Should probably be made a 'sticky' along with Barry's wiring diagram ?????
Posted: Sun May 10, 2009 8:49 pm
by d_harris
Josh, have you sorted it? if not, pm me your ermail address and I shall send you a pic