Page 1 of 1
installed oselli torquemaster where does vacuum connect
Posted: Thu Apr 23, 2009 10:45 am
by ssnjimb
Hello
Just hooked up my oselli torquemaster inlet manifold.
Where does the vacuum pipe from the distributor connect up to.
James
Posted: Thu Apr 23, 2009 11:07 am
by Stig
Isn't there a vacuum take-off on the carb?
Posted: Thu Apr 23, 2009 11:13 am
by ssnjimb
Iam not sure i have only just acquired it.
Its a su hs4 carburettor
James
Posted: Thu Apr 23, 2009 1:15 pm
by Kevin
There is a small stub on the carb, when I get home tonight I will post a photo if no-one else has done so.
Posted: Thu Apr 23, 2009 10:19 pm
by bmcecosse
Just look for a suitable small stub. If not there - you may need to drill the adapter plate and insert a little piece of small diameter copper tube through that, and connect vacuum pipe to the tube.
Posted: Tue Apr 28, 2009 9:17 am
by Kevin
Sorry for the delay here are a couple of photo's that should help.
The stub with the black cover is what you are looking for.
<br>
<br>
And a picture of the stub uncovered.
<br>
<br>