Morris Minor Owners Club

Been getting a bit confused by what I need to order here!

Im doing a full rebuild of the rear suspension, only things Im keeping from old are the axle (obviously) the dampers, the leaf springs and the damper mounting plates. Everything else (I think) I need new ones of!
Could someone please tell me what I need to order? Ive got this far so far.....
Rear shackle plates x4
Rear shackle pins x 4
U bolt plates x4
U bolts x 4
Bump stop rubbers x 2
Rear suspension poly bush kit (Ive contacted ESM to ask what exactly this contains)
Polyurethane pads for springs x 4
Front locating pin and plate x 2
Damper link arm (damper arm to chassis) I managed to fudge one of mine.....doh!

Anything Ive missed out?

Oh and has anyone got an exploded diagram of how the rear suspension is assembled onto the axle.....my memorys a bit lacking as its 2 years since it all came off!

thanks,
YG

Page I.2 of the workshop manual refers! Think you have it all covered.

Yea the one problem with my workshop manual is that its on a DVD, and I currently dont have a DVD drive........

Still, ive just found the photos I took of when the back axle came off, so luckily ive got some points of reference.

thanks,
YG

PM sent with download!

are you sure you really need all of that ... when I took mine apart all I needed to replace were the rubbers, bushes & shackle pins - the plates & u-bolts should clean up with a wire brush.