Page 1 of 1
LCB Manifold
Posted: Tue Mar 03, 2009 5:42 am
by Jefftav
Morning all,
Can anyone identify what this manifold is from. It was sold to me in a pile of MM spares but it doesn't look like the LCB manifold fitted to me morris?
Thanks Jeff<br>
<br>
Posted: Tue Mar 03, 2009 8:03 am
by PSL184
It's designed for a north / south installation so could be Minor although Midget / Sprite ones are similar. The clue is in how much clearance there is for the chassis rail. The Minor ones have much more offset...
Posted: Tue Mar 03, 2009 10:16 am
by Jefftav
This one doesn't seem to have the correct offset and wouldn't exit through the hole that the minor exhaust go through. Does anyon have a midget one to compare it to. I also think it has been cut short as there is not much length after the join.
Posted: Tue Mar 03, 2009 11:41 am
by PSL184
If there is no ofset then it is definately for a Midget / Sprite. Looks like its been cut off at the end but it would be easy to weld a piece on... Stick it on ebay - They go for around the £50 mark
Posted: Tue Mar 03, 2009 12:53 pm
by Peetee
Looks like the one I got from beaulieuiueiieu many moons ago. T'was a midget one which i was assured would fit a Minor.
However.......
Posted: Tue Mar 03, 2009 1:50 pm
by bmcecosse
Yes - it's for a Spridget.
Posted: Tue Mar 03, 2009 3:13 pm
by Jefftav
OK Thanks for everyones help. Jeff