Page 1 of 1
Rover wheels
Posted: Tue Feb 24, 2009 8:35 pm
by Jefftav
Hi all,
I have been on the lookout for some dcent 15in alloys from an MGF to fit the Marina PCD on my 2door saloon. I haven't found any so far but have unearthed a set of 15" alloys from a T Reg Rover 200 would anyone know if they would be the same PCD as the marina 3.75" I think and would they be OK on the Morris.
Cheers, Jeff
Posted: Tue Feb 24, 2009 8:47 pm
by charlie_morris_minor
i do not think they will fit i believe they are 100mm so will be to big. have you seen these on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %26otn%3D2
postage is not bad at 25 pounds
Posted: Tue Feb 24, 2009 9:56 pm
by bmcecosse
Only the MGF wheels are any good Jeff - because MGF was basically 2 Metro front subframes joined together! Just possible Montego alloy wheels may fit - but they are pretty ghastly!
Posted: Tue Feb 24, 2009 11:10 pm
by MGFmad
As an MGF owner anyone wanting to fit Rover 200 (or MG ZR) wheels to their MGF has to fit wheel adapters so I would guess that the same adapter may be suitable for the Minor - but check first.
The second item down on this page has the info -
http://www.mikesatur.com/acatalog/Onlin ... ers_5.html
Posted: Wed Feb 25, 2009 5:48 am
by Jefftav
Thanks for the tips boys, it just seemed like a good opportunity when I woudn't need to pay for postage for once. I will keep an eye on the set on ebay but it concernes me when they say about scuffs/pitting as although they offer a warranty it's another £25.00 to send them back so it's not so easy.
Thanks again, Jeff