Morris Minor Owners Club

I am currently removing the ital engine and gearbox from my minor. The four bolts holding the cross member are loose but just keep spinning. The heads of the bolts appear to be within the box sections running the full length of the car. does anyone know how to get to these so I can get a spanner on them. Cheers

you will need to remove your gearbox cover inside the car (if you have not already done this), this will give you access to the inside of your box sections and it simply a case of putting you arm / hand down inside of the tunnel whilst someone works under the car.

Thanks for the info, It'll be off this afternoon, (I hope)