Page 1 of 1
Manifold to use with SU HS4
Posted: Tue Jan 27, 2009 10:26 am
by ruislipboy
Hi can any one tell me which manifold I should use with an SU HS4 which I want to put on my 1029 cc Morris minor
Thanks for any help given
Posted: Tue Jan 27, 2009 11:31 am
by leyther8008
1029cc MINOR? dosnt ring a bell is it a bored out 948?
Posted: Tue Jan 27, 2009 12:14 pm
by ruislipboy
leyther8008 wrote:1029cc MINOR? dosnt ring a bell is it a bored out 948?
Sorry 1098
Posted: Tue Jan 27, 2009 12:22 pm
by bmcecosse
You can simply open out thje manifold you have - or get one from a Mini which will suit the larger carb - BUT - they will both still have the 'hot spot' - which robs several BHP from the engine. Depends what flange you have on the carb - if they are diagonal mounting then the MG Metro alloy inlet manifold (or one of it's copies) is the oen to get. If your carb has vertical mounting holes - then either make an adapter and use the MG Metro manifold - or buy a specialiost manifold. If your flanges are not diagonal - may be best to simply look for an HIF 38 carb - its a later and better design anyway, and it fits straight on the MG inlet manifold.
Posted: Tue Jan 27, 2009 10:39 pm
by Kevin
As mentioned a standard 998cc mini is the most staightforward as it was made with HS4 and fits onto the standard exhaust system without any mods needed, opening out a cast iron manofold wont be easy.