Morris Minor Owners Club

Posted: **Thu Oct 30, 2003 4:07 pm**

Hi All

I am tryinÇ to replace my gearbox on 1098 van and have been given a 948 gearbox(non ribbed). On tightening up, the engine won't turn over. So take it out again and realise the first motion layshaft is of a different profile. Any advice??

Thanks
Mark

Posted: **Thu Oct 30, 2003 6:59 pm**

The 1098 clutch is also different - does it foul the bell housing...?

Posted: **Thu Oct 30, 2003 7:00 pm**

I think you will find that the ratios wont be much good behind a 1098 either, why are you downgrading the running gear, the 948 clutch is only a 6 1/4" whereas the 1098 is 7 1/4"

Posted: **Thu Oct 30, 2003 7:02 pm**

Don't bother, the 948 box is not as strong.

Posted: **Thu Oct 30, 2003 9:08 pm**

Thanks everyone. That seems clear- I'll leave it out and find a 1098 box.

Cheers

Mark

Morris Minor Owners Club

948 gearbox into 1098 engine?

948 gearbox into 1098 engine?

gearbox