Steering Wheel Nut?
Posted: Sun Dec 28, 2008 1:07 am
What size is the nut that holds the steering wheel on? Ta in advace.
should you wish any more nut sizes there's a sticky in the mechanical section just above your post Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Steering Wheel Nut?
Page 1 of 1
Posted: Sun Dec 28, 2008 1:24 am
3/4 Whit should you wish any more nut sizes there's a sticky in the mechanical section just above your post
should you wish any more nut sizes there's a sticky in the mechanical section just above your post Posted: Sun Dec 28, 2008 2:54 am
Ah sorry, I completely forgot about that. Ta.
Steering wheel nut
Posted: Sun Dec 28, 2008 9:57 am
I used a 34mm 1/2" drive thin walled socket.
Declan
Declan
Posted: Sun Dec 28, 2008 10:30 am
Don't forget to remove the fuse for the horn or you will wake all the neighbours!!
Posted: Sun Dec 28, 2008 11:25 am
or a 1 5/16th AF socket
Posted: Sun Dec 28, 2008 12:38 pm
Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
Posted: Sun Dec 28, 2008 2:09 pm
Very good advice!!Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
wheel
Posted: Mon Dec 29, 2008 4:19 pm
Thats happened to all of us at some point!!!bmcecosse wrote:Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
