Page 1 of 1
TYPE 9 REAR MOUNT
Posted: Tue Dec 16, 2008 6:34 pm
by PAULJ
OK, Engine is all rebuilt, painted and looking lovely. Type 9 box has its concentric conversion. New front mounts fitted. My question is what happens at the back? I have the cross member to mount the back of the box but I guess there must be some sort of rubber mount. Where do I get one from, what type is it?
Thanks in advance
Posted: Tue Dec 16, 2008 6:48 pm
by Mogwai
When I replaced the bush on mine I got it from Frontline Spridget . But I would have thought most Minor specialists doing 5 spd conversions would sell them
Posted: Tue Dec 16, 2008 6:55 pm
by Matt
Posted: Tue Dec 16, 2008 7:11 pm
by jonathon
That is not the correct mount for a type 9 box though Matt
http://www.jlhmorrisminors.co.uk/store/ ... _mount.jpg
this one is
Posted: Tue Dec 16, 2008 7:20 pm
by PAULJ
Thanks jonathon, I take it you sell them? If yes can I buy one please
Posted: Tue Dec 16, 2008 7:39 pm
by Matt
Err just notcied there are 2 different pics on that link I gave... the 2nd pic is the right one!
Posted: Tue Dec 16, 2008 8:08 pm
by PAULJ
Thanks Mat, Just emailed the bloke
Posted: Tue Dec 16, 2008 8:51 pm
by PAULJ
Mat, the one on the link is both sides of the same mount? so I gess its the one I want. Jonathon can you confirm please
Posted: Tue Dec 16, 2008 9:08 pm
by jonathon
PM sent Paul
Posted: Thu Dec 18, 2008 6:49 pm
by pauln
The mount is the same as the one on a MK1/2 Cortina. When I fitted a t9 to my 1600e I just reused the old mount as it was ok (though I had bought it from esm). If I t9 my current Minor i'm going to mod a sierra crossmember and use the mount that comes with it. The e-bay link is the sierra x member mount and the 2nd link is the cortina mk2 one.
