Page 1 of 1
Clutch linkage
Posted: Wed Dec 03, 2008 4:39 pm
by Longdog
Hi all, has anybody tried a clutch linkage that runs directly from the pedal with a cranked rod instead of the cross shaft assembly?
I'm in the process of fitting a type 9 and now would be a good time to modify the linkage.
Posted: Wed Dec 03, 2008 5:51 pm
by glyna2006
I put a midget slave and a master under the car feed from a remote resevoir....glyn
Posted: Wed Dec 03, 2008 6:30 pm
by Longdog
Thanks for that, if I can I want to keep things as simple as poss but will give it some thought
Posted: Wed Dec 03, 2008 10:42 pm
by millerman
Longd...
This does work ok. Extend the operating rod and you're in business
Posted: Wed Dec 03, 2008 11:14 pm
by downsey
Yes you can do it, but will need a stabilizer bar running from the transmission to the front cross member or else it will just pull the motor back instead of actuating the clutch.
Posted: Fri Dec 12, 2008 4:12 pm
by Longdog
Thanks all for info.I have made linkage and action is very smooth.