Morris Minor Owners Club

Can anyone tell me if there is a t/stst housing that makes fitting a 940 head easier on a Minor with standard radiator? I seem to remember reading somewhere that the MGB ones does the job. Can anyone verify that.
Yes I know MMC in Brum do one, but that is £19. I am a Yorkshireman

http://www.mmoc.org.uk/index.php?name=P ... ic&t=13377
You have to drill the mounting holes slightly larger to fit the studs current ebay link is http://motors.shop.ebay.com/items/mgb-t ... trksidZm39 still works out a lot cheaper even with the weaker pound.

£19. I am a Yorkshireman

Somebody please help this man out! He's suffering enough as it is living on the wrong side of the Pennines!

Seriously though, I have the standard one that points in a funny direction and have a standard rubber hose that is bent too far but it does manage without leaking.

Yes I just have a standard cover and curved hose - it works. The 1275 Mini's use a top hose shaped like a Question Mark - which may be useful here too although I have never bothered to find out! Whatever cover is used - best to run a drill down the holes for a little extra clearance - and coat the studs with grease!

Haha, I'm a Yorkshireman living in Lancs,just. Was Yorkshire before boundary change.

Birmingham Morris Minor Centre sell a 1275 / 1098 conversion thermostat housing to fit standard rad.

Sorry --- missed that bit in your original question

wanderinstar wrote: Yes I know MMC in Brum do one, but that is £19. I am a Yorkshireman

Errr, yes I know they do.

The B-Series housing with the holes enlarged to 3/8" diam, plus a touch of filing, allows it to fit the Minor and use a standard top hose perfectly - been doing for the last 10 years!

Just a matter of finding one - when I wanted one, there were still B-Series engined cars in the breakers yards, Marina/Ital etc., but now?