Morris Minor Owners Club

I am at the stage of needing a new clutch this weekend to complete the 1275 swap. It will have to be a standard 1098 clutch. Anyone know the best / cheapest place to get one from pls?

Which engine/flywheel do you have? The 1098 clutch will not fit the standard Midget 1275 flywheel.

Its the 1098 flywheel I'm using Rich

original new old stock borg and beck, will see if i have any

thers one on ebay i think buy now £45.00?????have a look its about half price,,grandad

they atre pattern ones

well the man did ask for the cheapest,,grandad

cheapest not all ways the best in these repro pattern parts

If the pattern ones are no good then I'll go for original quality - It has to handle the power of my 1275 after all

i put quinten hazel in mine but it was around hundred pounds maybee alittleless i cant rember of hand but i try to use most days if i used it say 2/3 time amonth then the cheap one would do, each to there own realy.,,,grandad

some morrism minor shops do not stock the pattern ones any more due to problems

i will look and see if i have any spare borg and beck ones

i did have a few, but have also sold a few

if i have any will let you know the weekned

£80.00 including postage if i have any

Thanks Dennis but I really need to get the engine in this weekend so need to get one PDQ. Appreciate the offer though all the same....

ok no problem

The borg and beck clutches are still available new, they just come on a red box now. But they're the same tooling and quality.

minor_hickup wrote:The borg and beck clutches are still available new, they just come on a red box now. But they're the same tooling and quality.

Thanks - good to know

PSL184 wrote:

minor_hickup wrote:The borg and beck clutches are still available new, they just come on a red box now. But they're the same tooling and quality.

Thanks - good to know

i got my clutch from local motor factors,,grandad

Yes i know you can still get them new

mine are £65.00 plus postage

i was only trying to help other moggie owners

certanly very fair price,,,grandad

No quibble on the price from me Dennis - just the time factor... I should have asked earlier

minor_hickup wrote:The borg and beck clutches are still available new, they just come on a red box now. But they're the same tooling and quality.

And they are called AP Drivelines or something like that.