Page 1 of 1

Rear view mirror removal/fitting

Posted: Sat Nov 15, 2008 6:38 pm
by Luxobarge
Hi,

Just after a quick bit of advice. My new/old stock interior rear view mirror arrived today, so tomorrow I want to fit it, of course. It's really to fit an LCV, but hopefully the only differences are that the arm is longer and the mirror itself a bit larger - neither is a problem so long as it will fit in the existing "socket" at the top of the windscreen.

Here is the socket I'm talking about:

Image

My question - how do I remove the existing arm from this socket? Just pull hard? I'm worried about cracking the plastic socket if I do this, and they are unobtainable. Should I perhaps use some gentle hair-dryer heat? Can I remove the socket piece? How? I don't want to have to go behind the headlining if I can help it.....!

Any tips gratefully recieved as ever!

Many thanks - Rick. :D

Posted: Sat Nov 15, 2008 6:47 pm
by PSL184
Rick, what did actually come with the mirror? The guy at BMMC mentioned that some of the bits weren't compatable...? The cap you have pictured comes off to leave the mounting behind which is screwed to the header rail. You should be able to gently prise the cap off then unscrew 2 screws to remove the mount. The mirror arm can then be gently persuaded out by twisting/pullig etc.... carefully :-)

Posted: Sun Nov 16, 2008 11:10 am
by Luxobarge
Thanks for that - the mirror came with the mirror body itself, and the arm, which has a sucker on it. The top part (shown in photo) is not available, I have to re-use the old one.

Thanks for that - I'll give it a go when I get a chance!

Cheers :D

Posted: Sun Nov 16, 2008 11:32 am
by aupickup
early cars and vans had the black metal stem mirror arm and mirror with no cover plate

Posted: Sun Nov 16, 2008 7:29 pm
by Luxobarge
Thanks PSL - did what you said, and it went on just fine - all done now! You're becoming something like my "rear view mirror" guru, aren't you!

Here are the new and old mirrors before fitting - as you can see, the old one was very tatty - the plastic is just turning to dust! Also, you can see how that the "new" one is a little larger, and the arm is a bit longer, but it seems to look and work just fine on the car - brilliant!

Image

Many thanks to all as ever!

Cheers :D :D

Posted: Sun Nov 16, 2008 7:31 pm
by PSL184
I do have my "occasional" uses :-)