Morris Minor Owners Club

I am putting all the bits back on the car after the fitting the new wood and found that I didn't take a photo of the old rubber window channels and cannot remember -

The channel I am wondering about is the bottom channel for the inner window glass - the one that only slides open about 4", the mid rail internal capping has a metal coverplate fixed to it that the outer window bolts into. (hope my description makes sense )

Does the internal rubber channel go from B to C post and the metal coverplate goes on top of this, or does the rubber channel stop at the point the metal coverplate starts?

I have attached the only photo I have with the area I mean in the rectangle, my guess is the channel goes full length and the metal coverplate slots into the channel but I could be wrong

Will try to get a pic of mine tomorrow for you!

I'd take the felt channel an inch or two under the metal capping plate. To continue it under this plate any further will serve no real purpose.

jonathon wrote:I'd take the felt channel an inch or two under the metal capping plate. To continue it under this plate any further will serve no real purpose.

That's how mine are.