Page 1 of 1
Timing Covers
Posted: Sat Sep 20, 2003 9:17 am
by dawpooldad
Does anyone out there know if it is possible to fit the timing cover and front pulley from a 948 engine onto the 803 SER II engine?
I don't like the felt seal arrangement of the 803 (it leaks
, no matter what you do!) and the 948 has the timing marks at the bottom, thus making it easier to set by strobe light!
Regards
Mike R.
Posted: Sat Sep 20, 2003 2:11 pm
by rayofleamington
If it doesn't fit, you might find someone to fit an improved seal arrangement to the existing cover. It need to be done well to make sure the alignments are good.
I just had a lip seal fitted on my 1098 gearbox front plate which they did by machining the old seal area away and welding an insert in of the correct size for the seal.
Posted: Mon Sep 22, 2003 7:54 am
by lowedb
It depends on which 803! If you have an 803 with the wide fan belt, the crank pulley fouls the new timing pointers. You could change all rthe pulleys, though.
Timing covers!
Posted: Mon Sep 22, 2003 10:15 pm
by dawpooldad
Thanks Ray and Lowedb, it appears that I've got the narrow fan belt, so I'm now in the market for the bits to try it,
Thanks again.
Dawpooldad
