workingon the brakes
Posted: Thu Sep 18, 2003 7:39 pm
When you buy new brake cylinders they come with plastic
'top hat' shaped plugs in the threads to keep them clean.
If you save these plugs,you will find that when you disconnect
any brake pipe union the plug will 'snap'over the flared end
and stop fluid from escaping while you get on with your work.
'top hat' shaped plugs in the threads to keep them clean.
If you save these plugs,you will find that when you disconnect
any brake pipe union the plug will 'snap'over the flared end
and stop fluid from escaping while you get on with your work.