Page 1 of 1
Convertible hood frame catching
Posted: Tue Jun 17, 2008 12:30 pm
by Julesgti
Hi I was wondering if someone could help me explain why the hood frame on the convertible catches in the top of the door frame.
Is it because the bolts / rivets have worn to the extent that is is dropping?
Has anyone else had this problem before??
Regards,
Jules
Posted: Tue Jun 17, 2008 12:58 pm
by Peetee
Usually yes. The joints wear, the frame flattens and the doors catch the tips of the cross-bars.
Convertible frame
Posted: Wed Jun 18, 2008 4:26 pm
by Julesgti
Many thanks. I thought it would be the cause, but this is my first convertible, so wasn't sure.
What's the best way to repair?? drill out and rivet again or bolt it?
This convertible seems to have had lots of use as the rear suspension springs are almost worn through and I've got to check the torsion bar position, but if correct has dropped alot !!!
Regards,
Jules
Posted: Wed Jun 18, 2008 5:46 pm
by Peetee
What's the best way to repair
Sorry, can't advise on that one
Posted: Wed Jun 18, 2008 6:58 pm
by bmcecosse
Yes -you could carefully drill out and fit snug fitting bolts.
Posted: Fri Jun 20, 2008 1:28 pm
by ims101
Just be careful that the head of the bolt or the nuts don't rub, catch or snag/tare the hood! The rivets are smooth and don't stick out proud of the frame.
Posted: Fri Jun 20, 2008 8:41 pm
by bmcecosse
Indeed - larger rivets would probably be best!