Morris Minor Owners Club

Hey, Just been trying to put my engine back together ready to go back in the car

But I there seems to be a loose wire hanging about..

Could somebody please tell me where this wire is supposed to go and how it fits?!!

Thanks

This looks like a suppressor capacitor which someone has added to the car to reduce interference when a radio is fitted. The normal place to fit it would be between earth and the connection on the dynamo which goes to the brushes.

In practice it would be bolted onto the same place as the coil bracket on the dynamo which can be seen on the left of your second picture and the flying lead would go to the larger of the two terminals at the end of the dynamo.

However your engine should run perfectly well without it.

However your engine should run perfectly well without it

But your radio will sound like a foodmixer full of broken glass.

More normally fitted to the ignition circuit rather than the dynamo. But don't worry about it for now.

Lovely, thanks a lot. I was slightly worried when that fell out!

On the subject of supressors, any idea where I can get one cheaply and easily. I need a radio in the trav. I will go nuts without one...

You probably won't need them unless you have copper core HT leads with no suppressors attached. The only interfierence I've had on any mog was on a car with a failing coil.

Good stuff!