Page 1 of 1
Door Latch/Striker Plate
Posted: Thu May 29, 2008 4:03 pm
by MinorMoments
Need a replacement for my 2 Dr saloon and ordered what I believed to be the correct one as described from ESM. Only it has comes with only one catch and not two so the door sticks out and does not sit flush with the body now. I ordered part DCH102 so could they simply have sent me the wrong part for should 2dr salooon only have one and not two catches?? Not sure I have described this very well... Just blame it on being female please....
Posted: Thu May 29, 2008 6:06 pm
by polo2k
lucky i had a catalogue net to me lol
dch102 is listed as plate-striker traveller. The only other one listed is for the 4 door and from memory, I think my '63 4door only has 1 slope, rather than the saw tooth type, with 2 points. Id give them a ring and check. could just be it got picked wrong.
Ive just ordered a box full from them and ive got the day off work tomorow
very reliable
latch
Posted: Fri May 30, 2008 5:17 pm
by Willie
There is one spring loaded catch only which is the 'safety lock position' preventing the door from swinging open if it was not fully closed in the first place. The door should move further in until the door latch can fall behind the rear edge,which is not spring loaded, and thus hold the door closed.