Page 1 of 1
wireing rev counter
Posted: Wed May 28, 2008 2:01 pm
by neiltomlinson
hi all i am just fitting a rev counter in my mogey its a electronice one on the back its got coil & + .& - the neg is wired up to the light the coil one goes on to the + or - on the coil & were does the + go neil
Posted: Wed May 28, 2008 4:22 pm
by alex_holden
The rev counter connects to the same terminal that goes to the points. I think that might be the - coil terminal on a negative earth car but don't take my word for that.
Posted: Wed May 28, 2008 9:56 pm
by lofty1000
Hi Neil, Ive just fitted a Rev Counter and found this site really useful:
http://www.lotuselan.net/publish/bouncing_tach.shtml
Mine is a RVC type counter compatable with electronic ignition, the RVI counter is compatable with points.
terminal 1 is for the power
terminal 2 is for trigger lead which will go to terminal on coil marked 'cb' or earth
terminal 3 is earth
[url]pic of RVC
