Morris Minor Owners Club

Posted: **Tue May 20, 2008 8:03 pm**

I'm wondering which seat fits where! Is the drivers side the one with the recliner adjusting wheel on the right or the left please?

Posted: **Tue May 20, 2008 8:12 pm**

I think the adjuster wheels are in the middle of the car (so in the right-hand seat the wheel would be on your left).

Posted: **Tue May 20, 2008 8:25 pm**

metro seats are perfect for a metro

Posted: **Tue May 20, 2008 8:39 pm**

Thanks Alex.

metro seats are perfect for a metro

I'm not sure about that, as a lot seem to be taken out and sold!!

Posted: **Wed May 21, 2008 5:24 am**

I find my Metro seats fit very nicely in my Metro. Whereas my Metro seats (that I sold a couple of years ago and which came back to me when I bought my Minor) don't fit my Minor so well.

As for the recliner, I can't remember which side it is on the Metro, but if on the outside of the seat in the Minor there's not a lot of room to reach down to turn it. the seats don't appear sided in any other way so simply fit however works best for you

Posted: **Wed May 21, 2008 7:03 am**

Looks like the adjusters face each other

[/img]

Posted: **Wed May 21, 2008 11:27 am**

We found that if you put the adjusters in the middle then they dont argue with the working of the inertia seat belt.

Posted: **Wed May 21, 2008 2:34 pm**

I just finished taking the seats out of my minor(Drivers seat) and it looked pretty simple just 4 bolts hold down a bracket. Thats for the two brackets that hold it into place. So in theory most seats without gadgets like heated seats would work with some purswasion and metal work. At least i hope. My seats were in terible condition.

Posted: **Wed May 21, 2008 2:50 pm**

anexisWeasle wrote:I just finished taking the seats out of my minor(Drivers seat) and it looked pretty simple just 4 bolts hold down a bracket. Thats for the two brackets that hold it into place. So in theory most seats without gadgets like heated seats would work with some purswasion and metal work. At least i hope. My seats were in terible condition.

You need a special adapter frame to make the Metro seats fit the Minor floor properly and at the correct height. The frame bolts at the back as well as the front so you need to drill new holes in the floor to fit it.

Posted: **Wed May 21, 2008 3:43 pm**

Yea hence i said the metal work

.

Posted: **Wed May 21, 2008 6:49 pm**

You need a special adapter frame to make the Metro seats fit the Minor floor properly

The seats shown in the picture are genuine metro seats and they would not fit to the specially made 'metro seat bases' produced by a well known supplier. Aparently the source of metro seats changed over the years and the width between the runners altered.

Posted: **Wed May 21, 2008 7:51 pm**

Agreed they have to be from an early Metro to fit the "metro seat bases" from the well known supplier. early 80's I believe.