Page 1 of 1

Bleeding Marina disc brake set-up

Posted: Thu May 15, 2008 12:22 pm
by millerman
Advice required on bleeding the brakes when the rubber valve cup in master cylinder has been removed for the Marina disc set-up.

Have tried the 'usual' way but it's slow progress :cry:

Cheers all

Posted: Fri May 16, 2008 12:36 am
by bmcecosse
Make sure the calipers are mounted with the bleed nipples uppermost!

Posted: Sun May 18, 2008 11:19 am
by callyspoy
i had a bit of a nightmare when i did mine, found it was just a LOT of air in the system so it was compressing the air and not pushing out the fluid like normal. took ages...could be that...