Morris Minor Owners Club

Posted: **Wed May 14, 2008 6:58 pm**

Theres nothing wrong with my marina brake setup (except the master cylinder) but I have been looking at ways to upgrade...

It looks like MGB disks will physically fit (I am just waiting for someone to get back too me about the diameter between the hub mounting holes) and they are just over an inch larger in diameter. (but I might be wrong)

Obviously these discs wont fit with the standard marina calipers, so Im wondering if anyone has and MGB calipers kicking around that they could measure?

Posted: **Wed May 14, 2008 8:09 pm**

A Minor specialist has developed a vented Ford based kit to suit the Marina, using either 3.75" pcd or 108mm Ford.

Posted: **Wed May 14, 2008 8:30 pm**

I have MGB calipers on my traveller with marina disks.It's a straight swap.

Posted: **Wed May 14, 2008 10:42 pm**

Matt , have a read of the Marina forums, could save you loads of time and effort

Posted: **Fri May 16, 2008 12:38 am**

You must be doing some massive braking to need an upgrade!

Posted: **Tue May 20, 2008 10:25 am**

Hi,
You might find some usefull info on my site about brakes etc.
I had spent some time setting up marina brakes in my van.
Hope his will help. If not you may find something of interest here.
Do email me and let me know if there is anything you might want
to know and I will try to help where I can.

http://morris-alive.atspace.com/Picture_galleries.htm

Noel

Morris Minor Owners Club

Marina brake upgrade

Marina brake upgrade

marina brake setup