Page 1 of 1
rad cap
Posted: Tue May 06, 2008 7:25 pm
by callyspoy
right, im pretty sure i asked this before for my dad, but cant find the thread...sooo...
i've read before that if you fit a 1275 you should fit a higher LBage cap...if so, where do you buy them from?? thanks
*callum*
Posted: Tue May 06, 2008 7:31 pm
by bigginger
Sure I'm being thick, but "LBage cap"?
a
Posted: Tue May 06, 2008 7:45 pm
by alex_holden
I think he means poundage, ie. pressure.
Personally I would stick with the standard cap.
Posted: Tue May 06, 2008 7:56 pm
by callyspoy
yeah sorry...!!
Posted: Tue May 06, 2008 8:45 pm
by Mogwai
Im using a 7 lb cap its the highest you can get with the long neck type cap as on the minor.
I think its the same as an early mg midget
I did run with the std cap for years without any problems though
Posted: Tue May 06, 2008 8:49 pm
by bmcecosse
Std cap will be fine - do add a 'catch bottle' on the overflow pipe. When it cools down it sucks back in any water thrown out.
Posted: Tue May 06, 2008 9:31 pm
by callyspoy
okay, well i was thinking of fitting an expansion tank...any ideas on this?
remember a while ago i was thinking of staying standard! hahaha!
Posted: Tue May 06, 2008 9:39 pm
by alex_holden
Personally I wouldn't bother with that either - I haven't and I don't lose a noticeable amount of water. Maybe a cupful between services. If you put too much water in the radiator will blow the excess out on the first run but after that it settles down and doesn't lose any more. Don't fix it if it isn't broken!
Posted: Tue May 06, 2008 9:45 pm
by bmcecosse
I find it's quite handy - if there is a wee (small) boil up (maybe when toiling up a long hill at speed) at least the water is contained and - refills the rad on cooling down.
Posted: Tue May 06, 2008 9:48 pm
by alex_holden
I've not had a problem with boiling up on this car even on long hills in hot weather. My first Minor overheated on practically every hill but I suspect the radiator and water galleries were badly furred up.
Posted: Tue May 06, 2008 10:16 pm
by bmcecosse
Well - mine tends to blow out water if worked 'hard' - but it is big valve head/raised CR and larger carb on alloy inlet. Water bottle catches it all. Bought a temp gauge 6 years ago -still not fitted !