Page 1 of 1
marina van wheel nut thread size
Posted: Wed Apr 30, 2008 8:25 pm
by callyspoy
hi folks, currently sat on my car is a marina van axle with bigger wheel studs, currently holding the wheels on to said axle are some crappy wheel nuts. i dont know the thread size on them, so cant buy any nice nuts. they are bigger than minor ones...i was tempted to think possibly same as MGB but dont want to spend unless i know for sure...any chance of anyone knowing what the thread is??
Posted: Wed Apr 30, 2008 8:40 pm
by Matt
Marina vans use a 4.5" PCD, so I doubt you have a van axle if the MGF wheels fit ;)
They are likely to be montego/maestro studs and are probably an M10 fine. If you have a set of vernier calipers measure the diameter and the amount of threads per inch and im sure someone will help!
Posted: Wed Apr 30, 2008 8:51 pm
by callyspoy
oh okay...as ever you help me out matt! rite...so big wheel studs...i will look tmorrow, bit dark to be going about with a torch!
Posted: Wed Apr 30, 2008 9:38 pm
by les
bit dark to be going about with a torch!
That's the best time to use a torch
Posted: Wed Apr 30, 2008 9:42 pm
by Matt
Great answer Les!
Posted: Thu May 01, 2008 5:20 pm
by callyspoy
i hate you both!!! ;-)
Posted: Thu May 01, 2008 6:04 pm
by mrbenn
les wrote:
bit dark to be going about with a torch!
That's the best time to use a torch
Posted: Thu May 01, 2008 6:14 pm
by callyspoy
OI! don't you join in too!!
Posted: Thu May 01, 2008 7:39 pm
by mrbenn
Sorry
