Page 1 of 1
Front & Rear Split Bumpers And other parts wanted for Lo
Posted: Wed Apr 09, 2008 9:37 pm
by moggs222
I have recently purchased an incomplete Low Light saloon and need to locate the following parts. The split rear bumper complete including mountings. The split front bumper chrome blades (got the valances). Drivers side quater light window with all the seals, hinges, pivots and mountings. Beige door trims and the chrome covers for the door pulls (same as series 2 I think). Any help appreciated, regards moggs222
Posted: Thu Apr 10, 2008 8:26 pm
by moggs222
Just been looking at the car again and remembered I also need some wheel bolts as quite a few are missing, again any help appreciated, moggs222
Posted: Thu Apr 10, 2008 9:44 pm
by mike.perry
Be careful with the wheel bolts. The early ones are a different thread to the later ones
Posted: Thu Apr 10, 2008 10:46 pm
by alanworland
Could you not cut 4 inches out of a later pair of bumpers?
mm parts wanted
Posted: Fri Apr 11, 2008 9:06 am
by moggs222
Yes I know there are two types, I appear to have a mixture of both, course and fine thread. I need some more of the course threaded ones. Early bumpers are completely different to later ones. I will happily make some new ones from scratch if I could get some parts for patterns. All I have so far are the two front split valances and the front and back joiners.
Posted: Fri Apr 11, 2008 11:06 am
by jonathon
I have a pair of original high line rear wings(used but good) and complete running gear in mint condition (excluding the motor) if they are of any use. Pm me if they are
Posted: Sat Apr 12, 2008 11:43 am
by pgc520
Hi, I have a spare set of rear bumper complete needs some work exc mountings and split front bumper chrome blades, drop me a pm and we can discuss if they are any use.
Andrew