Page 1 of 1
Horn problem
Posted: Tue Mar 11, 2008 10:43 pm
by bloodyank
After taking my steering wheel off, painting and reassembly, my horn doesn't work. Is it fused? Not sure where the fuse box is...
Here's a pic of my regulator. Are there likely fuses in this?
Thanks
[/img]
Posted: Tue Mar 11, 2008 10:48 pm
by alex_holden
That's the fuse box, your regulator has already been removed.
Posted: Tue Mar 11, 2008 11:52 pm
by Packedup
If the horn doesn't work after taking the wheel off and putting it back on, my guess would be the problem is there!
Check the horn push is on correctly, and the contact between steering wheel and horn wiring is good.
Posted: Thu Mar 13, 2008 10:31 pm
by FrankM83
probably as packedup said! probably you missed something on reassembly or maybe you painted the place where it should have been earthed to? Also as Alex said you don't seem to have a regulator that's the fusebox just pull the cover towards you and you'll see the fuses
Posted: Thu Mar 13, 2008 10:55 pm
by 8009STEVE
The wires under the insulating tape look like an alternater conversion