Page 1 of 1
Bootlid seal glue
Posted: Wed Feb 27, 2008 10:29 pm
by Mogwai
I'll be fitting a new boot seal soon & will probably use evostick to glue it on as its quite flexible plus I already have some. Has anyone used or know of anything better or will evostick be fine for this
Thanks
Posted: Wed Feb 27, 2008 10:36 pm
by MoggyTech
Evostick will be fine. Timebond is also very good.
Posted: Wed Feb 27, 2008 11:05 pm
by alanworland
Evostick sounds good, my seal has come off once already after using a spray adhesive, if it comes off again I shall go the evostick way!
Posted: Thu Feb 28, 2008 11:00 am
by dunketh
I used domestic silicon sealer.
Posted: Thu Feb 28, 2008 6:25 pm
by stevey
I used Bostick contact adhesive - doesnt react with cellulose paint. seemed to work well as long as its given time to dry - close the lid and leave it for 24hrs.
Posted: Thu Feb 28, 2008 7:13 pm
by aupickup
be careful of silcone it can attack the paint and metal
Posted: Thu Feb 28, 2008 7:28 pm
by MoggyTech
dunketh wrote:I used domestic silicon sealer.
If you have ever got 'fish eyes' in a paint finish, you would destroy everything containing Silicon in your garage. Horrid stuff outside of a bathroom.
Posted: Sun Mar 02, 2008 7:52 pm
by Mogwai
I've stuck it on with evostik. so far so good seems to have bonded well