Page 1 of 1
big end and main bearing bolts
Posted: Wed Feb 20, 2008 9:11 pm
by XDB
The bolts on the 1098cc engine I have dismantled don't have tabs to lock them in.They appear to have a tapered seat. The engine is a silverseal replacement unit if that means anything to anyone place.[img][img]
http://i218.photobucket.com/albums/cc17 ... 1020-1.jpg[/img]
can they be reused with something like threadlock, or are they to be used just once
Posted: Thu Feb 21, 2008 8:25 am
by Spag
I degrease em, and wire brush em, blow the holes out with the airline, then re-fit em with threadock.
Not had any fall out yet
Posted: Thu Feb 21, 2008 10:16 am
by XDB
that's what I'll do thanks
Posted: Thu Feb 21, 2008 3:22 pm
by bmcecosse
Yes - they will be fine - weren't even threadlocked in as standard - but a few spots on the threads will be a good idea. I used them many times on Mini engines without problems.
Posted: Thu Feb 21, 2008 5:15 pm
by bigginger
But they had (useless) locking tabs as standard, didn't they?
a
Posted: Thu Feb 21, 2008 5:17 pm
by bmcecosse
The old bolts would have had - but the newer design are 'self locking', although I always add some Loctite!
