Morris Minor Owners Club

I know that front and rear are different but do they fit all models? I need new ones for my 1951 MM Tourer and don't want to get the wrong ones .. they're very expensive aren't they!

Thanks,

Well I know the front valence is slightly different up to 1954 cars but I think the blades are the same apart from the early split bumbers, Its probably best to speak to one of the large suppliers just to make sure.

*LCV BORE ALERT* The LCV ones are different again - shorter, and usually not chromed. Quite how that's helpful, I'm not sure, but there it is...
a

The highlight MM & Early S11 front bumper blade was different in that the position of 2 of the bolt holes are different. Later ones will fit but you would need to make 2 extra holes in your valance - and if you fitted overiders these would then obscure the sidelights.

Early bumper blades are not available new - you need to find good 2nd hand & have them plated.

Check out Callyspoys sig pic here
http://mmoc.org.uk/index.php?name=PNphp ... ic&t=18981

This is the correct early blade - the overiders on the later one would line up with the sidelight.

Rog

HarryMango wrote:The highlight MM & Early S11 front bumper blade was different in that the position of 2 of the bolt holes are different. Later ones will fit but you would need to make 2 extra holes in your valance - and if you fitted overiders these would then obscure the sidelights.

Rog

Many thanks Rog, that is very helpful.

aaah...my cars famous! yeah...don't ever look at that front bumper close up, isopon me up baby! and the blade is crooked...but...it is original!!!