back from holiday, back to work! Its underbody time.
Posted: Sun Feb 10, 2008 7:21 pm
Well then, after an amazing week of Skiing in France, its back to the grindstone. The plan of attack for the next month is.....finish the final bits of sill and inner wing repairs. Seam weld all the floor sections together.
Then, its over onto its side, where ill weld in the new crossmember and repair the chassis leg then it will all be stripped to bare metal, coated with POR-15 metal ready, followed by POR-15 rust preventative paint, then on with many many many liberal coatings of Chassis black courtesy of POR-15.......this is not an advert, im just able to get this stuff cheap! Oh and of course, tetroshuzch all the crud catching areas.
Sound like a plan?
Then, its over onto its side, where ill weld in the new crossmember and repair the chassis leg then it will all be stripped to bare metal, coated with POR-15 metal ready, followed by POR-15 rust preventative paint, then on with many many many liberal coatings of Chassis black courtesy of POR-15.......this is not an advert, im just able to get this stuff cheap! Oh and of course, tetroshuzch all the crud catching areas.
Sound like a plan?
