Page 1 of 1
rear wings
Posted: Sat Jan 12, 2008 10:40 am
by aupickup
what company is best for saloon rear wings, late type
Posted: Sat Jan 12, 2008 7:11 pm
by youngun
I have a sneaking suspicion that the wings are all made by the same pressing company. If you go onto ESM or Bull motif, you'll see that they have "heritage" wings available for a bit extra....they are supposed to be the superior wings.
hope that helps,
YG
Posted: Sat Jan 12, 2008 8:07 pm
by jonathon
LMC and Heritage are the mainstream suppliers. In my opinion they are as bad as each other for fit, but the Heritage ones are slightly heavier grade steel. The main issues we have with both suppliers but especially Heritage is that the length of the wings differ , we have had some which are 20-25mm short. In my opinion spending almost £100 per wing they should be at least somewhere near to fitting. Options are high quality glass fibre if not needing to keep original.
Posted: Sat Jan 12, 2008 8:33 pm
by aupickup
well fibre glas ones where is the best supplier
Posted: Sat Jan 12, 2008 8:44 pm
by MoggyTech
aupickup wrote:well fibre glas ones where is the best supplier
ESM and BM both do good quality glass fibre panels.
Posted: Sun Jan 13, 2008 9:23 am
by steve4063
aupickup wrote:well fibre glas ones where is the best supplier
JLH do good fibreglass
not badly priced either
Posted: Sun Jan 13, 2008 10:38 am
by 8009STEVE
Ther are a couple on ebay at the moment