Morris Minor Owners Club

E mail me at
ian.beaton@dsnd.co.uk
and i will send you a list of the
torque setting for the Mog 1000

Does anyone have this list? Ian's e-mail address is no longer valid.

From somewhere else on the website:
Here are the engine ones in lbft.
If you want any others please ask.

2 cylinder side cover
4 rocker cover
6 sump to crankcase
6 timing cover 1/4 unf
8 water outlet elbow
9 oil pump
14 timing cover 5/16 unf
15 manifold to cylinder head
16 oil filter
17 water pump
25 rocker bracket nuts
35 connecting rod big end
35 to 40 flywheel set screws
40 cylinder head stud nuts
60 main bearing set screws
70 crankshaft pulley

6 timing cover 5/16 unf
...
14 timing cover 5/16 unf

Can't remember which size is which, but the small hex screws on the timing chain cover are the low torque ones (there are 2 different sizes, and the big ones go into the block and the small ones just screw into the plate and are easily stripped!)