Morris Minor Owners Club

Will a midget LCB manifold fit a 1098 minor?
Thanks
Bern

dont think so, I think it fouls the chassis leg.

No. That was the first 'performance' mod I ever bought and was a failure

Thanks folks, I,ll take it of my watch list then!

If you can get it cheap buy it! its extremely easy to modify it for use on a minor if you have a welder. I did that on mine before i converted to 4age running gear. Worked great, actually i sold that on eBay a few months ago i should have asked if someone on here wanted it first

How? Heat and bending, or what?

no, each primary needs to be turned approximately 90 degrees via U-bends bought at your local speed shop. Look at my 4age postings and you can see how i built my header for that applicaton, its the same idea.

http://www.mmoc.org.uk/index.php?name=P ... light=4age


if you have to scroll down a few postings

That's amazing!
Welding stainless too.

<a href="http://photobucket.com" target="_blank"><img src="http://i98.photobucket.com/albums/l246/ ... 7_1708.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>


Heres the spridget 1275 header i modified for my morris.

I might have a go at modding one of the 3 I have

It's really not very hard at all. Welding the thin walled tubing is a pain though

If anyone successfully manages this without too much hassle do you think you could start 'knocking them out' to order?
I'd probably go for one myself depending on cost. (cant be more expensive than maniflow ones!)

It's a job i've been 'planning' for 3 years now!