marina pedal box fit

Post by **PAULJ** » Sat Nov 03, 2007 8:47 pm

Hi all, does anyone know where I can get (buy) a mounting box to fit a Marina pedal box?
I was told to that someone used to make them.
Cheers

Post by **callyspoy** » Sun Nov 04, 2007 12:49 am

look on esm, im pretty sure they sell them.

Post by **aupickup** » Sun Nov 04, 2007 5:23 pm

check this out on ebay

http://cgi.ebay.co.uk/Morris-Minor-or-M ... dZViewItem

Post by **LouiseM** » Sun Nov 04, 2007 6:03 pm

And here's the actual pedal box

http://morrisminorspares.co.uk/shop/pro ... fb1fcfe696

Post by **PAULJ** » Mon Nov 05, 2007 5:53 pm

Thanks for the link, That's what I was after bit pricey though has anyone got one that they could take dimensions of and a rough sketch. I have a large bender at work, He will make me one

Post by **bmcecosse** » Mon Nov 05, 2007 7:57 pm

If you already have the pedal box - then using the ESM picture you should be able to work out the dimensions required by doing a bit of 'scaling'.

Post by **jonathon** » Mon Nov 05, 2007 8:36 pm

You must strengthen up the bulkhead when doing this mod as its not designed for this application.