What carpets for Series II with 1098 gearbox?

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
winger300
Minor Fan
Posts: 358
Joined: Thu Apr 15, 2004 5:54 pm
Location: Stockport, Manchester
MMOC Member: No

What carpets for Series II with 1098 gearbox?

Post by winger300 »

I'm looking at the new carpet sets, but not sure which to get as I have a Series II with a 1098 box and engine.

Is the only difference between the series II and 1000 sets around the gearbox cover?

also, are the Newton carpets the best available?
Top
Sidney'61
Minor Legend
Posts: 1550
Joined: Tue Jul 24, 2007 8:35 pm
Location: Northampton
MMOC Member: No

Post by Sidney'61 »

Hey, I think that's the only difference, basically the gaitor on the gear stick in the series IIs is round whereas it is square in the 1000s so it just depends which one you got, if you do get the wrong carpet a new gaitor only costs a couple of quid, I assume they can just be swapped over.
By the way im only really guessing, i'm sure someone else can clarify exactly! :-?
Andy W____________1961 2-door 948cc (Sidney)_____________1963 2-door 1275cc (Emily)_______

Top
overider
Minor Fan
Posts: 482
Joined: Sun Aug 19, 2007 9:55 pm
Location: Yorkshire.Gods own county.
MMOC Member: Yes

Post by overider »

Newton carpets are well worth the extra in my opinion. Especially if you are planning to keep the car, they will serve you well
HAVE IT! LOVE IT! DRIVE IT!
Top
picky
Minor Addict
Posts: 751
Joined: Wed Dec 22, 2004 11:27 am
Location: York, UK
MMOC Member: No

Post by picky »

I think what winger wants to know is will a set of carpets that are shaped for a 1098 car fit the interior of a series II. Normal series II car fitted with 1098 carpets would obviously not fit round the gearlever, but are there any other differences in the floor that poeple now about??
1969 Four door Saloon Old English White 1275 with ported head and HS4 carb. Wolseley 1500 front brakes. Currently off the road with a leaky master cylinder!
Top
steve4063
Minor Fan
Posts: 430
Joined: Tue May 17, 2005 4:07 pm
Location: Norfolk/Suffolk
MMOC Member: No

Post by steve4063 »

well i fitted a series 2 into a 1000 no problem

so i'd say no not really they are basically the same

i did notice a little difference around the pedals area i had to cut a few more slits to make it fit but you wouldn't have noticed
[img]http://i205.photobucket.com/albums/bb110/s_mitch6/3.jpg[/img]
Top
pmdavies
Minor Friendly
Posts: 41
Joined: Wed Jun 06, 2007 1:49 pm
Location: Southampton
MMOC Member: No

Post by pmdavies »

I am new to Minors so am at risk of embarrasing myself....but isn't the position of the gearstick where it comes through the floor different on the 1000 than the series II?? I thought the series II had a 'fairy wand' gear stick so the hole in the transmission tunnel will be further forward? If you have a series II with a 1000 engine and gearbox then you must have the transmission tunnel cover from a 1000 as well so I think you'd need a 1000 carpet set. As I say I'm a bit of a Minor novice so the experts may correct me but thought I'd 'float' the idea as no one else had!

Regards

Pete
Top
forbesg
Minor Fan
Posts: 103
Joined: Wed Apr 21, 2004 1:55 am
Location: Christchurch, New Zealand
MMOC Member: No

Post by forbesg »

pmdavies wrote:but isn't the position of the gearstick where it comes through the floor different on the 1000 than the series II??
You are quite correct.
Top
Post Reply

Return to “Other”