Page 1 of 1
Van box repairs
Posted: Sun Aug 26, 2007 12:14 am
by jjcymru
The van box on my GPO has rotten in the gutters and about 3" x 3/4" below one section.
I intend to gas weld a repair section to replace the rotten metal.
Where can i get hold of gutter repair sections?
does the scalp of the roof come apart at the gutter area?
Much info needed for morris newbie.
Many thanks
Jonathan
Posted: Sun Aug 26, 2007 8:20 am
by aupickup
try fairmile restorations. link is on the LCV site
Posted: Tue Aug 28, 2007 11:47 am
by wibble_puppy
hi jjc,
http://www.fairmilerestorations.co.uk/
the van's roof is attached in a rather complex way: there's the roof panel, then an insert all the way round, then the walls of the cargo area. The internal and external gutters are formed by the way these three pieces of metal meet and are curved up and/or down. Repairs are not for the faint-hearted, but fairmile will be able to give you lots of advice.
Good luck!
Posted: Sun Sep 02, 2007 1:16 pm
by aupickup
ok you have 3 seperate panels here
the roof
the gutter
the side panel or cargo side
the roof is welded to the gutter and then this is welded to the flat on the top of the side panel.
the peice you can feel as you run your hand along the inside of the cargo bay is the gutter panel, this extends from the inside to the outside