Page 1 of 1
rusted headlamp bowl - MOT failure?
Posted: Wed Jul 11, 2007 8:54 pm
by picky
I was fitting new wiring through the headlamp bowl today and the hole for the wiring has rusted through, there is now a large hole here instead. Do I need to replace this for an MOT? because it is not structural or anything, and the headlamp is still solidly held to the car so I cant see any reason for it compromising safety.
Picky
Posted: Wed Jul 11, 2007 9:54 pm
by simmitc
As long as the moutning for the lamp is OK so that it retains its correct adjustment then you should be OK.
Posted: Thu Jul 12, 2007 10:46 pm
by kennatt
whynot fit a new bowl if you are fitting new wiring.The ragged hole will damage the wiring anyway.Plastic bowl kit from tom roy £11.95
Posted: Sat Jul 14, 2007 10:47 pm
by picky
yes i know they are cheap but all the screws are rusted solid so will be fiddly to replace it, and i just want the car quickly on the road, preferably with a valid MOT certificate
Posted: Sun Jul 15, 2007 12:36 am
by moggyminor16
no it will be fine i have only just the front on mine that hold the light in and they passed this year but in the morning will be replacing them both with the plastic ones from a landrover (cheaper to buy them )