Page 1 of 1
metal thingy...!
Posted: Sun Jul 01, 2007 1:35 am
by callyspoy
hi people, i have a little request...after the conversation about my 803, i have decided to use my dads 1100 as a donor engine so i can actually drive the thing. thing is...i need the metal plate that the gear stick comes through(please tell me the actual name for this so that i don't have to write that as a description of what it is again please!)
sooo...if there is anyone in my general area, i.e-portsmouth or soton, gosport etc who has one that they would like give me
or more likely, sell me. then please let me know...thanks
*Callum*
Posted: Sun Jul 01, 2007 1:55 am
by Redmoggy
Metal plate the gearstick comes through?
Do you mean the bolt in section of floor?
Think i got one of those to!
Posted: Sun Jul 01, 2007 2:09 am
by callyspoy
ha, yes i do mean one of those! i have quite a way with words! okay, well i'll e-mail you tomorrow about it if that's okay, i only just got in from work and need to go to sleep! but i will ask you a few questions tomorrow. thanks for writing back!
*Callum*
Posted: Sun Jul 01, 2007 8:06 am
by Kevin
i have decided to use my dads 1100 as a donor engine so i can actually drive the thing
Hi Callum I assume you mean a 1098cc engine from a Minor and not one from a Morris/Austin 1100 as that will take some fitting.
Posted: Sun Jul 01, 2007 4:01 pm
by callyspoy
i do indeed mean the 1098...
Posted: Sun Jul 01, 2007 4:07 pm
by callyspoy
oh...also...i will need a gearstick! so...same thing applies, if anyone has a spare that want to give or sell to me, then great! let me know.
*Callum*
Posted: Sun Jul 01, 2007 4:30 pm
by Peetee
I've sent you a PM !