Page 1 of 1
14" steel wheels for those with Ital/Marina Running gea
Posted: Sat Jun 30, 2007 4:54 pm
by Matt
I've found the wheels im going to run Emilia on, they are 14" dia, with a 3.75" PCD, 5.5J wide. They are from a Montego. Rear wheels have no clearance issues at all. Front wheels are a bit close, Im going to run with a 3mm spacer and 175 section tyres. From what I've seen I wouldnt advise running tyres more than 185 wide on the front!
I assume therefore that alloys from Montegos would work fine too
Posted: Fri Jul 13, 2007 7:46 pm
by rayofleamington
They are from a Montego.
Whose Montego? ;-)
Re: 14" steel wheels for those with Ital/Marina Running
Posted: Fri Jul 13, 2007 9:37 pm
by Packedup
Matt wrote:
I assume therefore that alloys from Montegos would work fine too
Yep. And Maestro wheels also fit.
I'm toying with the idea of going to 14" Montego or Maestro wheels on teh Triumph when (if?) it's back on the road as it seems harder and harder to get decent 13" rubber in sensible profiles.
Posted: Tue Jul 17, 2007 9:39 pm
by Matt
Well you gave me 3 monty wheels, and 1 is currently on the car, the other 4 i bought are being painted
Posted: Wed Jul 18, 2007 1:26 pm
by Orkney
Thats handy ! not far from here are 6 or more scrap montegos - and a few maestros too if i'm not mistaken !