Page 1 of 1
Austin Maestro A series
Posted: Thu Jun 28, 2007 10:49 pm
by boltonbill
Sorry if it's a topic covered already..but.
Anybody used a Austin Maestro A series engine, and if so what are the difficulties over and beyond using a Marina engine.
Posted: Thu Jun 28, 2007 10:52 pm
by bigginger
Yes, JLH (Jonathon's his user name here) for one converts them, since the Maestro is front wheel drive and the Minor rear. Dunno the full details, but it invilves a new crank and some block machining for things like oil seals.
Posted: Thu Jun 28, 2007 10:58 pm
by boltonbill
Hmm, sounds a bit too radical if the crank needs changing, thanks.
I'll keep looking out for the scrap marina & ital versions.
Posted: Thu Jun 28, 2007 11:07 pm
by jonathon
Crank is only modified for the spigot bush, and does not require replacement. You will need a dedicated flywheel and some mods to the alloy breather plate along with a modified 1098 backplate.
Posted: Fri Jun 29, 2007 7:56 am
by bmcecosse
I bought one really cheaply - in excellent 'almost new' condition - found it was possible but not easy, and so sold it on to a Maestro owner. Kept the unleaded head (also 'new') - and sold it on for a nice 'earner'!
Posted: Fri Jun 29, 2007 11:19 am
by dunketh
This forum needs a FAQ section.
