Page 1 of 1
pos to neg earth
Posted: Sat Jun 23, 2007 2:13 pm
by trenowin
can anyone help please, being a new member having just aquired a 1969 pick-up, i would like to change the earth polarity from positive to negetave earth so i can fit a radio etc. last week i fitted +earth electronic ignition and a new coil, would this have to be changed again. ?
*Moved to electrical by andrew*
Posted: Sat Jun 23, 2007 3:25 pm
by alex_holden
I think there's an article somewhere in the technical tips area about how to do the conversion.
The coil will be fine but I think you will probably need to either change to a negative earth electronic ignition module or go back to points.
polarity
Posted: Sat Jun 23, 2007 4:39 pm
by Willie
You would have to swop the + and - leads on the coil for maximum efficiency though it will still work if you don't but All electronic
ignition modules are polarity conscious. If you are lucky it will have a changeover switch.
Re: pos to neg earth
Posted: Sun Jun 24, 2007 11:17 am
by trenowin
trenowin wrote:can anyone help please, being a new member having just aquired a 1969 pick-up, i would like to change the earth polarity from positive to negetave earth so i can fit a radio etc. last week i fitted +earth electronic ignition and a new coil, would this have to be changed again. ?
*Moved to electrical by andrew*
job done !! it took all of 10 mins. Thanks for the help.

ps have gone back to the points. anyone want a Pos earth
electronic ignition set!!
Re: pos to neg earth
Posted: Sun Jun 24, 2007 11:30 am
by alex_holden
trenowin wrote:anyone want a Pos earth electronic ignition set!!
Try advertising it in the "Parts for sale" section of this site.
Posted: Sat Jun 30, 2007 8:03 pm
by davidwarren

If you have a dynamo, dont forget you need to change the "memory" of the field winding. Flash the [edit by Roger rust its the small terminal] terminal to earth using a wire. If you don't the dynamo won't charge.
David.