Page 1 of 1
Clutch .. won't release ..
Posted: Fri May 04, 2007 8:22 pm
by JustinMinor1000
So .. Bommels clutch is biteing about 1/2 an inch under the floorboards .. I'm guessing that the thrust bearing is worn .. is it even worth adjusting the nut on the fork or should I just get Ray down and get the engine out?
Posted: Fri May 04, 2007 8:55 pm
by bmcecosse
Always worth a go on the adjustment - nothing to lose really!
Posted: Sun May 06, 2007 1:17 pm
by JustinMinor1000
Yes .. Might have been that the front chassis leg was rotten and part of the relay was broken off a bit of 4mm steel plate and a totally non origional pair of 6mm tapped holes and some stainless bolts ..
Seems fine now ..