Page 1 of 1

good old rusty floor

Posted: Wed Apr 25, 2007 10:21 pm
by steve4063
go on then whats the best way to do the floor i've got a 4 door and there isn't a lot of floor left in her.

the rest of the car is near enough perfect looks really really nice until you open the door and can see the road :-?

i know u can buy the complete panels are they expensive and where's the best place i presume the usual places ie e*m b*ll etc etc are ok thats where i get most of my stufff from

is there a good way in which to tackle this project

also the front suspension is right down on the bumps
i thought he'd removed the suspension dampers but they're still attached have they gone are they common for going if so can the be repaired or altered if not i've got a spare set somewhere in the garage

Posted: Wed Apr 25, 2007 10:36 pm
by Welung666
PM sent Steve :D

Re: good old rusty floor

Posted: Wed Apr 25, 2007 10:49 pm
by alex_holden
steve4063 wrote:also the front suspension is right down on the bumps
Check the condition of the centre cross-member where the torsion bars attach to it.