Page 1 of 1
what size bolts
Posted: Tue Apr 10, 2007 8:10 pm
by RogerRust
To fit the front panel to the front cross member?
I usually use 6mm
but want to get it right this time.
Posted: Tue Apr 10, 2007 8:16 pm
by HarryMango
1/4BSF my friend - most of the body fixings were BSF originally.
Rog
Posted: Tue Apr 10, 2007 11:00 pm
by RussLCV
Is there a list of the sizes and threads?
Posted: Tue Apr 10, 2007 11:03 pm
by Kevin
Is there a list of the sizes and threads?
Yes but its in Rogers head I dont know how he remembers them all
Posted: Tue Apr 10, 2007 11:05 pm
by RussLCV
Nice one Kev.........................OK Roger jot it all down mate!!
Posted: Wed Apr 11, 2007 7:56 pm
by HarryMango
I'll try to get around to it sometime.
I've always had a head for numbers. Part of my first job was as a stores assistant in a Precision Engineering Co & I memorised well over half the part nos & even later on in life when I had far more important tasks to do the Engineers would not bother to look up any part nos - Rog whats the code for a left handed spocket furgler on the Talyrond 73...
Rog
Posted: Thu Apr 12, 2007 6:40 pm
by RussLCV
OK Rog
Would like to see that list