Fibreglass tops on pick-up's
Posted: Wed Mar 28, 2007 3:09 pm
Removed as I'm no happy to discuss anymore.
Paul Humphries
Paul Humphries
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Fibreglass tops on pick-up's
Page 1 of 1
Posted: Wed Mar 28, 2007 3:36 pm
The bulkhead behind the seats is the cab back, not part of the bed. Remove it and you're left with what the van has, ie no enclosed cab.
Posted: Wed Mar 28, 2007 3:46 pm
Removed as I'm no happy to discuss anymore.
Paul Humphries
Paul Humphries
Posted: Wed Mar 28, 2007 3:56 pm
I'd *guess* around £300 - £500, but could be wrong 
Posted: Wed Mar 28, 2007 5:59 pm
yes i would think considering it will want usual welding
thinking of the worst condition up to £500.00
thou a gen pick up on ebay without mot and needed a lot of welding etc fetched £2000.00
thinking of the worst condition up to £500.00
thou a gen pick up on ebay without mot and needed a lot of welding etc fetched £2000.00
Posted: Wed Mar 28, 2007 6:05 pm
sounds interesting, paul - keep us updated
Why not take someone from your local branch with you when you go and see it? If it's the Potteries then there is a lot of LVC experience there
Why not take someone from your local branch with you when you go and see it? If it's the Potteries then there is a lot of LVC experience there
Posted: Wed Mar 28, 2007 6:22 pm
Removed as I'm not happy to discuss anymore.
Paul Humphries
Paul Humphries
Posted: Tue Apr 03, 2007 5:38 pm
Did you get to look at the pick-up and find out what the back was all about?
Steve
P.S. I have sent you a PM as well
Steve
P.S. I have sent you a PM as well
Posted: Tue Apr 03, 2007 5:44 pm
Removed as I'm not happy to discuss anymore.
Paul Humphries
Paul Humphries
Posted: Tue Apr 03, 2007 7:51 pm
Hello Paul
The fibreglass hard top is non standard and should be very cheap!! These are never built by the factory and it depends when it was fitted as to what condition it will be in. Oftern GRP cracks and glazes.
So realistically, if ihe has advertised it he must have some price in mind and push him for that. If not forthcoming offer £50 and see teh reaction? Were you expecting more? If so how much, everyone has a price! But the GRP top should not come into the bargaining unless the pick-up sides are good as they are rare and you may end up with a GRP top with nowt to put it on
I have images of one or two, they are not too pretty
The fibreglass hard top is non standard and should be very cheap!! These are never built by the factory and it depends when it was fitted as to what condition it will be in. Oftern GRP cracks and glazes.
So realistically, if ihe has advertised it he must have some price in mind and push him for that. If not forthcoming offer £50 and see teh reaction? Were you expecting more? If so how much, everyone has a price! But the GRP top should not come into the bargaining unless the pick-up sides are good as they are rare and you may end up with a GRP top with nowt to put it on
I have images of one or two, they are not too pretty
Posted: Tue Apr 03, 2007 8:15 pm
Removed as I'm no happy to discuss anymore.
Paul Humphries
Paul Humphries