Page 1 of 1

speedometer wiring

Posted: Sat Mar 24, 2007 1:36 pm
by Pascal
Hi,

Can anybody tell me where each wire goes at the back of the speedometer (colour + location)?

When I switch the ignition on, should both the oil pressure light and oil filter light be on, or just the oil pressure light? At the moment only one comes on, which I suspect is the oil pressure one as it has a green+green/brown wire. The one with a green+green/yellow wire doesn't come on.

The driver's handbook says later models are not fitted with an oil filter warning light, however mine has a bulb wired. I've check the oil filter but couldn't see any wire connected to it, though there's a free green/yellow wire next to the oil filter with nowhere to connect to.

Regards

Posted: Sat Mar 24, 2007 2:46 pm
by paulk
Ours has a light and bulb fitted and also a wire down into the engine bay but No filter terminal so no light working. There will probably be loose wire somewhere in the engine bay for it.

Posted: Sat Mar 24, 2007 3:14 pm
by aupickup
yes it does depend on whether it is easrly or late models.
altho maybe the wiring looms were never altered

oil filter light

Posted: Sat Mar 24, 2007 6:58 pm
by Willie
The oil filter light ceased to be fitted in 'late 1969'

Posted: Sat Mar 24, 2007 7:05 pm
by bigginger
But the wire *seems* to have been simply left there thereafter.

Posted: Sun Mar 25, 2007 2:27 am
by jackkelleher
The wiring looms were changed a couple of times, weren't they?..

Posted: Sun Mar 25, 2007 2:31 am
by Welung666
Only to add flashing turn signals then the change from 3 wire rear lights to 4 wire, otherwise they were pretty much the same.

Posted: Sun Mar 25, 2007 9:23 am
by RogerRust
This is off a series III 1961 but it might help

Image

Image