I wasn't sure where to post this one but....
doe's anyone know how I would go about either lowering or getting a 2 door saloon lowered? is this possible? and if so how much hassle is it?
Thanks alot
Lowering a 2 door saloon
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Moderator
- Posts: 5108
- Joined: Mon May 20, 2002 1:00 am
- Location: Stoke-on-Trent, Staffordshire, UK
- MMOC Member: No
VERY easy.
You don't need any modification parts to lower the front. Either adjust the torsion bar adjuster next to the main chassis crossmember, and / or turn the torsion bars one spline to give further adjustment.
To lower the back you just need lowering blocks which fit in between the axle and springs (available from most Minor places).
You don't need any modification parts to lower the front. Either adjust the torsion bar adjuster next to the main chassis crossmember, and / or turn the torsion bars one spline to give further adjustment.
To lower the back you just need lowering blocks which fit in between the axle and springs (available from most Minor places).